• 16S configuration: The nominal voltage is approximately 51.2V (up to 57.6V at full charge), providing higher power output to meet the long-term and high-load operation requirements of tethered unmanned aerial vehicles.
• 314Ah capacity: The energy density has been significantly enhanced, allowing a single charge to support drones in carrying more devices or performing more complex tasks. For instance, if the power consumption of a drone is 2000W, a 314Ah 16S battery can provide approximately 8 hours of continuous power supply (theoretical value, actually affected by factors such as load and efficiency).
Share
| Serial Number | Items | Parameters | Remark |
| 1 | Nominal Capacity | 314Ah | |
| 2 | Nominal voltage | 51.2V(Output DC750V) | 1P16S, output after voltage boost |
| 3 | Electric quantity | 16kWh | |
| 4 | Charging cut-off voltage | 58.4 V | |
| 5 | Discharge cut-off voltage | 40V | |
| 6 | Standard charging power | 8000w | |
| 7 | Continuous discharge power | 5000w | |
| 8 | Heat dissipation method | Air-cooled | |
| 9 | Charge operating temperature | 10 ~ 45 ℃ | |
| 10 | Discharge operating | - 20 ~ 55 ℃ | |
| 11 | Charge interface | REMA plug | 48V/200A charger(380V AC input) |
| 12 | discharge interface | WS28 aviation plug-in | |
| 13 | BMS requirements | With protective plate | |
| 14 | Shell | Black sheet metal outer box | Two universal joints are installed at the bottom Wheels, 2 directional wheels |
| 15 | Dimension | 800×500×350±3mm | Height * Width * thickness |
| 16 | Weight | 120kg | |
| 17 | Other | It includes a DC48V to DC750V boost module | |
| Note: The above technical indicators correspond to individual battery packs of this specification. It is strictly prohibited to use battery packs of this specification in series or parallel externally without authorization. | |||
Back to Top
Copyright © 2025 VoltNexus Battery Technology Co., Ltd.
Power By Bontop